Secure Router
CRTR-210 is an indigenously developed router, which provides Next Generation secure networking platform with carrier-grade IP/MPLS features, built on C-DOT’s Network Operating System. The system has a switching fabric and backplane capacity of upto 56Gbps. CRTR-210 Router enables hardware-accelerated encryption/decryption of network packets at Line rate. It supports IPSEC/IKE, MACSEC and can communicate with Standard QKD Devices to ensure unmatched security. It is an SDN enabled router and supports Openflow as a Southbound Protocol. The Router is TEC-ER Certified
- 24 x 1G Electrical/Optical (SFP) interfaces and 4 x 10/100/1000 Base-T Electrical interface ( E1 interface supported through SFP)
- MPLS IPv4/v6 L3VPNs, Outbound and Inbound Route filtering, Per-interface, Per-route, Per-VRF label allocation, Loop prevention, Static and Dynamic LSP provisioning.
- Supports comprehensive Quality of Service (QoS) and sub-features like DiffServ QoS, IEEE 802.1p CoS, MPLS CoS,WRED, network traffic policing/shaping, congestion-avoidance to provide Rich Quality of Service capabilities for different SLAs
- Supports carrier-grade IPSEC and MACSEC which provide simple yet robust encryption using Hardware Modules. CRTR-210 also supports integration of QKD Devices which make it almost impenetrable from MITM attacks. Apart from this CRTR-210 also supports Layer2 port security methods like 802.1x, hardware ACLs.
- Supports NAT which translate IP-addresses at hardware level.
- 1+1 Redundant, 230V AC Power Supply
- Form Factor: 1U, 19’’ rack compliant
- Data Plane Protocols Ethernet, IPv4, IPv6, VRF, MPLS LSP, LSR and LER, Label Stacking, Packet Loss Protection/Fast Recovery
- Control Plane Protocols Static Routing, OSPF v2/v3, BGPv4, RIPv2/RIPng, Policy Based Routing, ISIS, Multicast PIM SM/PIM, DM/PIM SSM, IGMP v1/v2/v3, MLD, LDP, RSVP-TE, MPLS VPN, Virtual Routing Domains, DHCP, SDN Ready
- Layer 2 Protocols IEEE 802 1.D Bridges, IEEE 802.1Q Bridges, VLAN Trunking, Tagging, Jumbo Frames, IEEE 802.1d STP, IEEE802.1w: Rapid Spanning Tree Protocol (RSTP), IEEE802.1s: Multiple Spanning Tree Protocol (MSTP), BPDU Guard and Root Guard, IEEE 802.1AB LLDP, IEEE802.3ad: Link Aggregation, IEEE802.1p Class of Service, IEEE 801.2p, SPAN/RSPAN, Integrated routing and bridging, Secure VTP, MAC Table display/clear
- Security
- Line rate packet filtering (ACL), MACSec
- IEEE802.1X: VLAN Port Security and Authentication, MAC Filtering, per port configurable MAC addresses
- DHCP snooping, IP Source Guard, DAI
- Rate limiting, Traffic Policing
- NAT, IPSEC, CoPP
- BPDU Guard, Root Guard, BPDU filtering
- PKI with Local CA, Port Based storm control
- Management and SLA Tracking RS232 Console, SSHv1/v2, SFTP, SCP and CLI, RMON, SNMPv1/v2c/v3, Ping/traceroute, LSP ping/traceroute, TWAMP, Port & VLAN based Mirroring, Port Mirroring to remote analyzer (RSPAN), S-flow
- SDN Support
- Openflow v1.3
- Power Supply & form-factor Dual, 230V AC and 1U, 19” Rack mountable
- Edge/Access Router for Telcos, medium enterprises and campuses
- EMI/EMC
- CISPR 22
- IEC 61000-4-2
- IEC 61000-4-3
- IEC 61000-4-4
- IEC 61000-4-5
- IEC 61000-4-6
- IEC 61000-4-11
- Environmental
- QM333
- Equipment Safety
- IEC 60950-1 : 2005 + Al : 2009 + A2 : 2013
- TEC-ER
- EAL-3 Certification is in progress
- 24 x 1G Electrical/Optical (SFP) interfaces and 4 x 10/100/1000 Base-T Electrical interface ( E1 interface supported through SFP)
- MPLS IPv4/v6 L3VPNs, Outbound and Inbound Route filtering, Per-interface, Per-route, Per-VRF label allocation, Loop prevention, Static and Dynamic LSP provisioning.
- Supports comprehensive Quality of Service (QoS) and sub-features like DiffServ QoS, IEEE 802.1p CoS, MPLS CoS,WRED, network traffic policing/shaping, congestion-avoidance to provide Rich Quality of Service capabilities for different SLAs
- Supports carrier-grade IPSEC and MACSEC which provide simple yet robust encryption using Hardware Modules. CRTR-210 also supports integration of QKD Devices which make it almost impenetrable from MITM attacks. Apart from this CRTR-210 also supports Layer2 port security methods like 802.1x, hardware ACLs.
- Supports NAT which translate IP-addresses at hardware level.
- 1+1 Redundant, 230V AC Power Supply
- Form Factor: 1U, 19’’ rack compliant
- Data Plane Protocols Ethernet, IPv4, IPv6, VRF, MPLS LSP, LSR and LER, Label Stacking, Packet Loss Protection/Fast Recovery
- Control Plane Protocols Static Routing, OSPF v2/v3, BGPv4, RIPv2/RIPng, Policy Based Routing, ISIS, Multicast PIM SM/PIM, DM/PIM SSM, IGMP v1/v2/v3, MLD, LDP, RSVP-TE, MPLS VPN, Virtual Routing Domains, DHCP, SDN Ready
- Layer 2 Protocols IEEE 802 1.D Bridges, IEEE 802.1Q Bridges, VLAN Trunking, Tagging, Jumbo Frames, IEEE 802.1d STP, IEEE802.1w: Rapid Spanning Tree Protocol (RSTP), IEEE802.1s: Multiple Spanning Tree Protocol (MSTP), BPDU Guard and Root Guard, IEEE 802.1AB LLDP, IEEE802.3ad: Link Aggregation, IEEE802.1p Class of Service, IEEE 801.2p, SPAN/RSPAN, Integrated routing and bridging, Secure VTP, MAC Table display/clear
- Security
- Line rate packet filtering (ACL), MACSec
- IEEE802.1X: VLAN Port Security and Authentication, MAC Filtering, per port configurable MAC addresses
- DHCP snooping, IP Source Guard, DAI
- Rate limiting, Traffic Policing
- NAT, IPSEC, CoPP
- BPDU Guard, Root Guard, BPDU filtering
- PKI with Local CA, Port Based storm control
- Management and SLA Tracking RS232 Console, SSHv1/v2, SFTP, SCP and CLI, RMON, SNMPv1/v2c/v3, Ping/traceroute, LSP ping/traceroute, TWAMP, Port & VLAN based Mirroring, Port Mirroring to remote analyzer (RSPAN), S-flow
- SDN Support
- Openflow v1.3
- Power Supply & form-factor Dual, 230V AC and 1U, 19” Rack mountable
- Edge/Access Router for Telcos, medium enterprises and campuses