C-DOT CSX-210 Layer2/Layer3 Aggregation switch

Products / Switching & Routing / C-DOT CSX-210 Layer2/Layer3 Aggregation switch

Product image

C-DOT CSX-210 Aggregator is a Layer-2/Layer-3 Managed Ethernet switch for interconnecting servers, clients, RAS, routers and other devices used in the internet or intranet. It combines the power of modular architecture with the flexibility of the packet processing engine. PoE and PoE+ (15.4W/ 30W per port) are also supported. The C-DOT Aggregator can handle traffic with up to 48 x 1G Copper Ethernet ports and 4 x 1G/10G optical uplink ports for trunking/cascading. The switch supports all the security and configuration features needed in a L2/L3 Managed switch. CLI and GUI interfaces are available for configuration and monitoring along with an LED-based status.

  • 48-port Gigabit Ethernet Layer2/Layer3 Managed Switch with PoE /PoE+ support
  • 48 x 1G Copper Ethernet interfaces in Full Duplex Mode and 4 X 1G/10G optical interfaces for uplinks (Flexible speed Network Interfaces supported on uplink ports with 4 X 1G or 10G optical).
  • MACSec support on 4 x 1G/10G Uplink ports
  • Switching capacity of up to 160 Gbps
  • Ethernet Ring Protection Support
  • Standard and secured Management interfaces using CLI, console, SSH
  • Redundant, hot-swappable AC power supply.
  • Form-factor: 1U, 19” Rack compliant
  • Ideal for campus and access/aggregation network.
  • PoE/ PoE+ allows a single Ethernet cable to provide both a data connection and enough power to network devices such as wireless access points (WAPs), IP cameras  VoIP phones and Video IP Phones etc.
  • Available in two product variants: With PoE/PoE+ support or Without PoE/PoE+

  • Main Features
    • Supports 32K MAC addresses
    • IEEE 802.1q, 802.1p, 802.3x, 1588v2 PTP, 802.3az, 802.1x, 802.1AE (MACSec on uplink ports)
    • Rate limiting
    • Port/Flow mirroring
    • Traffic shaping
    • 10/100/1000Base-T FDX, ANEG ports
    • Link Aggregation
    • POE/POE+ on all ports with LLDP
    • DHCP Snooping and Relay
    • ARP Inspection
  • L2 switching features
    • RSTP, MSTP
    • MRP, MVRP
    • VLAN Learning
    • 512 TCAM-based QoS, VLAN & Security Profile Classification Entries
    • VLAN Translation & Trunking
  • L3 Switching and Multicast Features
    • Static Routing
    • DSCP based QoS
    • 32K L2 Multicast Groups supporting up to 1K port masks
    • 2K IPv4 Multicast Groups
    • 512 IPv6 Multicast Groups
    • IGMP v2/v3
    • MLD v1/v2
    • IGMP & MLD Snooping
    • VRRP
    • BGP
    • OSPF v.2/v.3, RIP v1,v2, RIPng
  • OAM
    • OAM and protection switching
    • PM
  • Protection
    • 1:1 port protection
    • ERPS
  • Security
    • RADIUS, TACACS+
    • ACLs
    • IP source guard, MAC binding
  • Management
    • CLI – console port & SSH, GUI
    • IPv4/IPv6
    • SNMP v1/v2c/v3
    • RMON
    • IEEE 802.10AB-2005
  • QoS
    • Port default priority
    • User priority, Input priority mapping
    • QCL
    • Storm Policing
    • WRED
  • Power Supply
    • Dual 230V AC supply
    • 230V AC for PoE/PoE+

  • As 48-port Gigabit Ethernet (Copper) Layer-2/Layer-3 Managed Switch or Aggregation Switch in Telecom Network, with or without PoE/PoE+.

  • 48-port Gigabit Ethernet Layer2/Layer3 Managed Switch with PoE /PoE+ support
  • 48 x 1G Copper Ethernet interfaces in Full Duplex Mode and 4 X 1G/10G optical interfaces for uplinks (Flexible speed Network Interfaces supported on uplink ports with 4 X 1G or 10G optical).
  • MACSec support on 4 x 1G/10G Uplink ports
  • Switching capacity of up to 160 Gbps
  • Ethernet Ring Protection Support
  • Standard and secured Management interfaces using CLI, console, SSH
  • Redundant, hot-swappable AC power supply.
  • Form-factor: 1U, 19” Rack compliant
  • Ideal for campus and access/aggregation network.
  • PoE/ PoE+ allows a single Ethernet cable to provide both a data connection and enough power to network devices such as wireless access points (WAPs), IP cameras  VoIP phones and Video IP Phones etc.
  • Available in two product variants: With PoE/PoE+ support or Without PoE/PoE+

  • Main Features
    • Supports 32K MAC addresses
    • IEEE 802.1q, 802.1p, 802.3x, 1588v2 PTP, 802.3az, 802.1x, 802.1AE (MACSec on uplink ports)
    • Rate limiting
    • Port/Flow mirroring
    • Traffic shaping
    • 10/100/1000Base-T FDX, ANEG ports
    • Link Aggregation
    • POE/POE+ on all ports with LLDP
    • DHCP Snooping and Relay
    • ARP Inspection
  • L2 switching features
    • RSTP, MSTP
    • MRP, MVRP
    • VLAN Learning
    • 512 TCAM-based QoS, VLAN & Security Profile Classification Entries
    • VLAN Translation & Trunking
  • L3 Switching and Multicast Features
    • Static Routing
    • DSCP based QoS
    • 32K L2 Multicast Groups supporting up to 1K port masks
    • 2K IPv4 Multicast Groups
    • 512 IPv6 Multicast Groups
    • IGMP v2/v3
    • MLD v1/v2
    • IGMP & MLD Snooping
    • VRRP
    • BGP
    • OSPF v.2/v.3, RIP v1,v2, RIPng
  • OAM
    • OAM and protection switching
    • PM
  • Protection
    • 1:1 port protection
    • ERPS
  • Security
    • RADIUS, TACACS+
    • ACLs
    • IP source guard, MAC binding
  • Management
    • CLI – console port & SSH, GUI
    • IPv4/IPv6
    • SNMP v1/v2c/v3
    • RMON
    • IEEE 802.10AB-2005
  • QoS
    • Port default priority
    • User priority, Input priority mapping
    • QCL
    • Storm Policing
    • WRED
  • Power Supply
    • Dual 230V AC supply
    • 230V AC for PoE/PoE+

  • As 48-port Gigabit Ethernet (Copper) Layer-2/Layer-3 Managed Switch or Aggregation Switch in Telecom Network, with or without PoE/PoE+.