Product image

सी-डॉट वायरलेस एक्सेस प्वाइंट (डब्ल्यूएपी) सार्वजनिक वाई-फाई हॉटस्पॉट जैसे बाहरी उपयोग के मामलों के लिए एक लागत प्रभावी, उच्च थ्रूपुट, असाधारण विश्वसनीय, मॉड्यूलर और प्रभावी वायरलेस समाधान है। एक्सेस प्वाइंट IEEE 802.11ac मानक का अनुपालन करता है और IEEE 802.11 a/b/g/n मानकों के लिए पिछड़ा संगत है। एपी दोहरे बैंड 2.4 गीगाहर्ट्ज और 5 गीगाहर्ट्ज में समवर्ती संचालन का समर्थन करता है। यह 2×2 MIMO और 20, 40 और 80 मेगाहर्ट्ज चैनल बैंडविड्थ का समर्थन करता है।
पीडीओ बनने के लिए क्या करें? (डीओटी की योजना के अनुसार- डीओटी से औपचारिकता के बाद बाद में प्रदर्शित किया जा सकता है)

  • पीडीओ बनने के लिए उपलब्ध पंजीकरण फॉर्म भरें
  • एक बार फॉर्म जमा हो जाने के बाद, आवेदक को मेल/एसएमएस, उसके क्षेत्र में पीडीओए/आईएसपी की सूची/डीओटी नोडल अधिकारी से संपर्क किया जा सकता है
  • इसके अलावा, पीडीओ का विवरण संबंधित एलएसए के डीडीजी (टी) को भेजा जा सकता है, जिन्हें कार्रवाई/प्रतिक्रिया/सुविधा आदि देनी होगी

डुअल बैंड आउटडोर वाई-फ़ाई 5 एक्सेस पॉइंट (WAP)
एग्रेसिव ईएमएस प्रा. लिमिटेड
  • श्री प्रशांत मिश्रा निदेशक - व्यवसाय विकास मेसर्स एग्रेसिव इलेक्ट्रॉनिक्स मैन्युफैक्चरिंग सर्विसेज प्राइवेट। लिमिटेड प्लॉट नं. 264, एसईसी 6, आईएमटी मानेसर, गुड़गांव - 122050, हरियाणा मोब। 9899113267, ई-मेल: prashant@aggressiveems.com
  • श्रीमान. मुकुल शर्मा असिस्टेंट वीपी एग्रेसिव इलेक्ट्रॉनिक्स मैन्युफैक्चरिंग सर्विसेज प्राइवेट लिमिटेड प्लॉट नंबर-264, सेक्टर-6 आईएमटी मानेसर गुड़गांव-122050, हरियाणा, भारत मोबाइल: +91 9818899029

• Standard :IEEE 802.11 a/b/g/n/ac • VLAN/QoS/Encryption/Authentication/Other standards : 802.1Q VLAN/802.11e/WMM/802.1x/802.11i/802.11s/WDS • Mode : Bridge • Operating Frequency : As per NFAP 2018 • Radio : 2 Wi-Fi Radios, Dual band (2.4 GHz & 5 GHz) concurrent operation • Coverage : 150 m • MIMO : 2×2 • Channel Width : 20/40/80 MHz • Clients : 64 concurrent users per radio. 128 per system • BSSID : 5 • Data Rate : 1166Mbps (n: 300 and ac: 866) • Services Supported : Voice, Video and Data • Features Supported : Rogue AP detection, WIDS, Self-healing and optimization • Operating Power : 10W (Max), Input Voltage Range: 10V to 60V DC • Power Source : PoE • WAN Port : 1x Ethernet Port – Gig bit auto-sensing • Audio indication : Yes (power up, booting, Ready) • Deployment Scenario : Outdoor Hotspot, Point to Point, Point to Multipoint, MESH • Max Tx Power : 28 dBm • PoE : 802.3af/at • Housing/Mounting : IP67, Pole mount, Lightning and Overvoltage Protection. Withstand high speed winds/thunderstorms • Operating condition : Temp. -20°C to +55°C, Humidity 10 to 95% non-condensing • Management : FCAPS through C-DOT EMS (SNMP based), C-DOT WAC Power Failure Alarm to NMS, Data and syslog capture for audit and analysis • Remote Upgrade : Yes • GUI : Yes • WANI Compliance : Yes • Authentication support : RADIUS protocol supported for external AAA server • Antenna : Internal Omni • Antenna Connector Type (Optional) : N(F) • Antenna Type supported (Optional) : Patch Panel, Omni, Sector, Grid

For PDO

  • Identifying PDOA or collaborating with PDOA to become a PDO
  • Arranging Internet Backhaul for the Access Points from TSP/ISP on commercial basis as PDO
  • Arranging for power and physical/civil infrastructure for Access Points installation
  • Arranging Access points from C-DOT Technology Manufacturing partners
For C-DOT
  • Providing WANI Compliant software to C-DOT Technology Manufacturing partners
  • Software support for Access Points
  • Software upgrade of Access points
For PDO Supplier
  • Testing of Access point for WANI
  • Hardware support for Access Points

• Standard :IEEE 802.11 a/b/g/n/ac • VLAN/QoS/Encryption/Authentication/Other standards : 802.1Q VLAN/802.11e/WMM/802.1x/802.11i/802.11s/WDS • Mode : Bridge • Operating Frequency : As per NFAP 2018 • Radio : 2 Wi-Fi Radios, Dual band (2.4 GHz & 5 GHz) concurrent operation • Coverage : 150 m • MIMO : 2×2 • Channel Width : 20/40/80 MHz • Clients : 64 concurrent users per radio. 128 per system • BSSID : 5 • Data Rate : 1166Mbps (n: 300 and ac: 866) • Services Supported : Voice, Video and Data • Features Supported : Rogue AP detection, WIDS, Self-healing and optimization • Operating Power : 10W (Max), Input Voltage Range: 10V to 60V DC • Power Source : PoE • WAN Port : 1x Ethernet Port – Gig bit auto-sensing • Audio indication : Yes (power up, booting, Ready) • Deployment Scenario : Outdoor Hotspot, Point to Point, Point to Multipoint, MESH • Max Tx Power : 28 dBm • PoE : 802.3af/at • Housing/Mounting : IP67, Pole mount, Lightning and Overvoltage Protection. Withstand high speed winds/thunderstorms • Operating condition : Temp. -20°C to +55°C, Humidity 10 to 95% non-condensing • Management : FCAPS through C-DOT EMS (SNMP based), C-DOT WAC Power Failure Alarm to NMS, Data and syslog capture for audit and analysis • Remote Upgrade : Yes • GUI : Yes • WANI Compliance : Yes • Authentication support : RADIUS protocol supported for external AAA server • Antenna : Internal Omni • Antenna Connector Type (Optional) : N(F) • Antenna Type supported (Optional) : Patch Panel, Omni, Sector, Grid

For PDO
  • Identifying PDOA or collaborating with PDOA to become a PDO
  • Arranging Internet Backhaul for the Access Points from TSP/ISP on commercial basis as PDO
  • Arranging for power and physical/civil infrastructure for Access Points installation
  • Arranging Access points from C-DOT Technology Manufacturing partners
For C-DOT
  • Providing WANI Compliant software to C-DOT Technology Manufacturing partners
  • Software support for Access Points
  • Software upgrade of Access points
For PDO Supplier
  • Testing of Access point for WANI
  • Hardware support for Access Points