24-Port Layer-2 Aggregation Switch

Products / Switching & Routing / 24-Port Layer-2 Aggregation Switch

Product image

C-DOT CSX-100 Aggregator is a Layer-2/Layer-3 Managed Ethernet switch for interconnecting servers, clients, RAS, routers and other devices used in the internet or intranet. It combines the power of modular architecture with the flexibility of the packet processing engine. PoE and PoE+ (15.4W/30W per port) is also supported. The C-DOT Aggregator can handle traffic with up to 24 x 1Gb Copper Ethernet ports and up to 4 x 1/10Gb optical ports for trunking/cascading. It is a carrier Ethernet switch with all the security and configuration features needed in a L2/L3 Managed switch. CLI and GUI interfaces are available for configuration and monitoring along with an LED-based status. The Switch is already deployed in the network.

  • 24 port Carrier Ethernet Layer2/Layer3 Managed Switch with PoE /PoE+ support
  • 24 x 1G Copper Ethernet interfaces in Full Duplex Mode and 4 X 1G/10G Optical interfaces for uplinks (Flexible speed Network Interfaces supported on uplink ports with 4 X 1G or 10G optical)
  • MACSec support on 4x1G/10G Uplink ports
  • Switching capacity of up to 128Gbps
  • Ethernet Ring Protection Support
  • Standard and secured Management interfaces using CLI, console, SSH
  • Redundant, hot-swappable AC power supply.
  • Form-factor : 1U, 19” Rack compliant
  • Ideal for campus and access/aggregation network.
  • PoE/ PoE+ allows a single Ethernet cable to provide both a data connection and enough power to network devices such as wireless access points (WAPs), IP cameras ,VoIP phones and Video IP Phones etc.
  • Available in two product variants: With PoE/PoE+ support or Without PoE/PoE+

  • Main Features
    • 24 x 1G Copper Ethernet interfaces + 4 x 1G/10G optical interfaces for uplinks
    • 64Gbps full-duplex throughput
    • MACSec on uplinks
    • PoE/PoE+ supported
  • L2 Features
    • 802.1Q VLAN
    • RSTP/MSTP,LLDP/LLDP-MED
    • Link Aggregation
    • Port/Flow Mirroring
    • DHCP snooping, DHCP relay
    • PoE/PoE+
  • Carrier Ethernet Features
    • MAC-in-MAC
    • Ethernet Virtual Connections, MEF
    • SyncE, IEEE 1588
    • ERPS
    • Ethernet OAM
  • L3 & QoS Features
    • Static Routing
    • IGMP/MLD Snooping
    • DSCP, 802.1p based QoS
    • QoS Classifier, Policer, Shaper
    • WRED
  • Security and Management Features
    • IEEE 802.1x, MAC-based authentication
    • MAC limiting
    • AAA
    • RADIUS/TACACS+
    • ACL, Storm Control, IP Source Guard
    • CLI/SNMP/Web-based GUI
    • RMON, Syslog
  • Dimensions
    • 19” rack mountable, 1U High
  • Power Supply
    • Dual redundant 230VAC power supply
    • 230V AC for PoE/PoE+ power supply

  • As 24-port x 1G(Copper) Layer-2/Layer-3 Carrier Ethernet Switch or Aggregation Switch in Telecom Network, with PoE/PoE+ support.

  • EMI/EMC
    • CISPR 22
    • IEC 61000-4-2
    • IEC 61000-4-3
    • IEC 61000-4-4
    • IEC 61000-4-5
    • IEC 61000-4-6
  • Environmental
    • QM333
  • Equipment Safety
    • IEC 60950-1 : 2005 + Al : 2009 + A2 : 2013

  • 24 port Carrier Ethernet Layer2/Layer3 Managed Switch with PoE /PoE+ support
  • 24 x 1G Copper Ethernet interfaces in Full Duplex Mode and 4 X 1G/10G Optical interfaces for uplinks (Flexible speed Network Interfaces supported on uplink ports with 4 X 1G or 10G optical)
  • MACSec support on 4x1G/10G Uplink ports
  • Switching capacity of up to 128Gbps
  • Ethernet Ring Protection Support
  • Standard and secured Management interfaces using CLI, console, SSH
  • Redundant, hot-swappable AC power supply.
  • Form-factor : 1U, 19” Rack compliant
  • Ideal for campus and access/aggregation network.
  • PoE/ PoE+ allows a single Ethernet cable to provide both a data connection and enough power to network devices such as wireless access points (WAPs), IP cameras ,VoIP phones and Video IP Phones etc.
  • Available in two product variants: With PoE/PoE+ support or Without PoE/PoE+

  • Main Features
    • 24 x 1G Copper Ethernet interfaces + 4 x 1G/10G optical interfaces for uplinks
    • 64Gbps full-duplex throughput
    • MACSec on uplinks
    • PoE/PoE+ supported
  • L2 Features
    • 802.1Q VLAN
    • RSTP/MSTP,LLDP/LLDP-MED
    • Link Aggregation
    • Port/Flow Mirroring
    • DHCP snooping, DHCP relay
    • PoE/PoE+
  • Carrier Ethernet Features
    • MAC-in-MAC
    • Ethernet Virtual Connections, MEF
    • SyncE, IEEE 1588
    • ERPS
    • Ethernet OAM
  • L3 & QoS Features
    • Static Routing
    • IGMP/MLD Snooping
    • DSCP, 802.1p based QoS
    • QoS Classifier, Policer, Shaper
    • WRED
  • Security and Management Features
    • IEEE 802.1x, MAC-based authentication
    • MAC limiting
    • AAA
    • RADIUS/TACACS+
    • ACL, Storm Control, IP Source Guard
    • CLI/SNMP/Web-based GUI
    • RMON, Syslog
  • Dimensions
    • 19” rack mountable, 1U High
  • Power Supply
    • Dual redundant 230VAC power supply
    • 230V AC for PoE/PoE+ power supply

  • As 24-port x 1G(Copper) Layer-2/Layer-3 Carrier Ethernet Switch or Aggregation Switch in Telecom Network, with PoE/PoE+ support.