Indoor HSAP (Sabal)
C-DOT's Indoor High Speed Access Point (HSAP) is a high throughput, high power, exceptionally reliable, modular and effective wireless solution for indoor use cases. The indoor/corridor Access Point (AP) complies with IEEE 802.11ac standard and is backward compatible to IEEE 802.11 a/b/g/n standards. The indoor AP has triple software programmable radios to support 2.4 GHz & 5 GHz concurrent users. It supports a minimum of 2x2 MIMO on both the radios/bands and can be extended upto 4x4.
• Aggregate data rate throughput of 1,733 Mbps on single radio with 160 MHz radio spectrum in 5 GHz ISM band • High Receive Sensitivity > -90 dBm • Active operator sharing, VLAN tagging, user based QOS, Multiple SSID • Supports Omni-directional / directional patterns • System management using C-DOT EMS and NMS • Supports 20/40/80/160 MHz channel bandwidths • Integrated NAT, DHCP support and Routing support • Robust design for durability • Wall / Ceiling mountable • 10G backhaul for high bandwidth applications • Dual power operation using power adaptor and POE. Compatible with 802.3 at /af Power over Ethernet (PoE) /AC/DC adapter • Configuration, Management using C-DOT Wi-Fi Access controller (WAC)
• Supports 802.1Q • Complied to Wi-Fi alliance standards WMM, WMM-PS, 802.11d, 802.11h and 802.11e • Two RJ-45 Ethernet ports of 10/100/1000 Mbps • Up to 26 dBm of output power per radio • 0° to 40° C - Operating temperature range; 10% to 90% non-condensing-humidity range • Protocol: Supports IPv4 & IPv6 and Extensible Authentication Protocol (EAP) – TLS, TTLS, MSCHAPv2, PEAP v0, EAP-MSCHAPv2, PEAP v1, FAST, EAP-SIM, EAP-AKA • Security: Supports WPA/WPA2-PSK, 802.1X authentication, including AES, and TKIP (in conjunction with AC) • Complied to TEC specifications & AP GR • Table Top and Wall Mount models available